{"product_id":"hunter-industries-i25-06-i-25-rotor-with-check-valve-6","title":"Hunter Industries - I25-06 - I-25 Rotor with Check Valve 6\"","description":"\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e Hunter Industries    \u003cstrong\u003eSKU:\u003c\/strong\u003e I25-06\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Hunter I25-06 is a 6-inch pop-up commercial gear-drive rotor with a plastic riser, adjustable 50- to 360-degree arc, standard drain check valve, and 1-inch female NPT inlet. The taller pop-up provides additional stream clearance over higher-cut turf and nearby plant material while retaining the flow capacity and long-range coverage of the I-25 platform.\u003c\/p\u003e\n\u003cp\u003eHunter’s current I-25 design combines adjustable part-circle and non-reversing full-circle operation in one rotor. Depending on the installed nozzle and operating pressure, the I25-06 provides an approximate radius range of 37 to 71 feet and flow from 3.8 to 31.5 GPM. Recommended and operating pressure is 40 to 100 PSI, with a standard nozzle trajectory of 25 degrees. Color-coded nozzles allow the system designer to match the rotor output to the site spacing, zone capacity, and available pressure.\u003c\/p\u003e\n\u003cp\u003eAutomatic arc return helps move the turret back to the programmed watering pattern if it is forced out of position, and the non-strippable drive mechanism helps protect the internal gears. QuickCheck supports through-the-top arc adjustment. The included check valve is designed to hold back up to 10 feet of elevation to reduce low-head drainage when the irrigation zone shuts off. Nozzle-package contents may vary, so confirm whether a specific nozzle is included before ordering.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6-inch pop-up plastic riser\u003c\/li\u003e\n\u003cli\u003eAdjustable 50- to 360-degree arc\u003c\/li\u003e\n\u003cli\u003ePart-circle and full-circle operation in one model\u003c\/li\u003e\n\u003cli\u003eAutomatic arc return\u003c\/li\u003e\n\u003cli\u003eNon-strippable, vandal-resistant drive mechanism\u003c\/li\u003e\n\u003cli\u003eQuickCheck through-the-top arc adjustment\u003c\/li\u003e\n\u003cli\u003eStandard drain check valve for up to 10 feet of elevation\u003c\/li\u003e\n\u003cli\u003e1-inch female NPT inlet\u003c\/li\u003e\n\u003cli\u003eApproximate 37- to 71-foot radius range\u003c\/li\u003e\n\u003cli\u003eApproximate 3.8- to 31.5-GPM flow range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon Uses\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial and municipal turf areas\u003c\/li\u003e\n\u003cli\u003eParks, athletic fields, and large lawns\u003c\/li\u003e\n\u003cli\u003eHigher-cut turf requiring additional pop-up clearance\u003c\/li\u003e\n\u003cli\u003eLandscape zones requiring part- or full-circle coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility and Installation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the nozzle according to required radius, flow, spacing, and available pressure.\u003c\/li\u003e\n\u003cli\u003eUse a compatible 1-inch swing joint or threaded connection.\u003c\/li\u003e\n\u003cli\u003eInstall the rotor level with finished grade and provide clearance for the full 6-inch pop-up.\u003c\/li\u003e\n\u003cli\u003eConfirm the irrigation zone can supply the selected nozzle flow at the required pressure.\u003c\/li\u003e\n\u003cli\u003eUse Hunter adjustment procedures for arc setup and nozzle installation.\u003c\/li\u003e\n\u003cli\u003eConfirm nozzle-package contents if a specific nozzle is required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhy choose the 6-inch I-25 instead of the 4-inch model?\u003c\/h3\u003e\n\u003cp\u003eThe 6-inch pop-up provides additional clearance over taller turf or surrounding plant material.\u003c\/p\u003e\n\u003ch3\u003eCan the I25-06 operate full circle?\u003c\/h3\u003e\n\u003cp\u003eYes. The rotor adjusts from 50 degrees through a non-reversing 360-degree full-circle pattern.\u003c\/p\u003e\n\u003ch3\u003eDoes it include a check valve?\u003c\/h3\u003e\n\u003cp\u003eYes. The standard check valve is designed to help prevent low-head drainage for elevation differences up to 10 feet.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Big Frog Supply?\u003c\/h2\u003e\n\u003cp\u003eBig Frog Supply carries Hunter I-25 rotors, replacement nozzles, swing joints, adjustment tools, valves, and commercial irrigation repair components.\u003c\/p\u003e","brand":"Hunter Industries","offers":[{"title":"Default Title","offer_id":46079456739351,"sku":"oba1794043432773","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/8931\/3815\/files\/hunter-industries---i25-06---i-25-rotor-with-check-valve-6_1.png?v=1794043452","url":"https:\/\/mossbelyn.com\/products\/hunter-industries-i25-06-i-25-rotor-with-check-valve-6","provider":"My Store","version":"1.0","type":"link"}